High Voltage 3.6/6, 6/10, 8.7/15 Power Cable

3.6/6kV SPYCB(Y), TPYC(Y), FA-SPYCB(Y), FA-TPYC(Y)

6/10kV SPYCB(Y), TPYC(Y), FA-SPYCB(Y), FA-TPYC(Y)

8.7/15kV SPYCB(Y), TPYC(Y), FA-SPYCB(Y), FA-TPYC(Y)

- Design guide : IEC 60092-350, -354

- Flame retardant : IEC 60332-1 & IEC 60332-3 Category A (FA-Type)

- Cold bend/impact : CSA 22.2 No. 03 (-35 ℃) (Cold Type)

- Max. conductor temperature : 90 ℃

1. CABLE TYPE 3.6/6kV (FA-)SPYCB, 3.6/6kV (FA-)SPYCBY

No. of Cores：1 core

Nominal Area：10，16，25，35，50，70，95，120，150，185，240，300，400，500，630.

2. CABLE TYPE: 3.6/6kV (FA-)TPYC, 3.6/6kV (FA-)TPYCY

No. of Cores：3 core

Nominal Area：10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300.

3.CABLE TYPE: 6/10KV (FA-)SPYCB, 6/10KV (FA-)SPYCBY

No. of Cores：1 core

Nominal Area：16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400, 500, 630.

4. CABLE TYPE: 6/10KV (FA-)TPYC, 6/10KV (FA-)TPYCY

No. of Cores：3 core

Nominal Area(mm2)：16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300.

5. CABLE TYPE: 8.7/15kV (FA-)SPYCB, 8.7/15kV (FA-)SPYCBY

No. of Cores：1 core

Nominal Area(mm2)：25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400, 500, 630.

6. CABLE TYPE: 8.7/15kV (FA-)TPYC, 8.7/15kV (FA-)TPYCY

No. of Cores：3 core

Nominal Area(mm2)：25, 35, 50, 70, 95, 120, 150, 185, 240, 300.

Classification	Code	Construction Detail
1. Conductor	T(S)	Stranded tinned annealed copper wires as per IEC 60228, Class B
2. Conductor screen		Semi-conducting layer (tape/compound)
3. Insulation	P	EPR as per IEC 60092-351.
4. Insulation screen		.Non-metallic part : Semi-conducting layer(tape/compound). .Metallic part : Copper tape. .A suitable separator tape(s) may be applied over the metallic part.C14
5.Cabling		.Three insulation screened conductors shall be cabled. .Flame retardant & non-hygroscopic fillers may be used. .Suitable tape(s) may be applied on the cabled core.
6. Sheath	Y	ST2(PVC) as per IEC 60092-359.
7. Armor	C (CB)	.Braid of copper alloy wires (-CB type) or galvanized steel wires (-C type). .Coverage density is minimum 90%
8. Paint		.The red paint shall be painted uniformly on the steel wire braid .“CB” Type or Protective covering Type, paint is dispensable.
9. Protective covering	Y	ST2 (PVC) as per IEC 60092-359. Outer sheath color : Red
10. Core identification		3C : Red, Yellow, Blue