Print Page
CTG3-A Oblique Spot Light
The scope of application
This product is designed to use for illumination in ship, mine, port, building site etc.
Products feature
1. Easy to install and replace the bulbs.
2. High luminous intensity and long illumination distance.
3. The shell of light is made of steel or stainless steel material and coated the surface by powder which is used for ship special, with the feature of corrosion and shock resistance.
4. The shade adopt transparent tempered safety glass.
5. The sphere toughened glass reflector has been installed inside, which can concentrate the ray of light to strong beam.
6. Joystick be matched and installed in cabin of ship, use it to control the body of light rotating 350 degree in horizontal and 30 degree in pitch
7. The cable outside diameter is Φ12～Φ14mm.
Adopt standard and product certification
1. Conform to RULES FOR CLASSIFICATION OF SEA-GOING STEEL SHIPS.
2. Conform to GB7000.7 of SAFETY REQUIREMENTS FOR FLOOD LIGHT.
3. Conform to GD01 of GUIDELINES FOR TYPE APPROVAL TEST OF ELECTRIC AND ELECTRONIC PRODUCTS.
4. Approved by China Classification Society (CCS).
Installation
CTG3-A Oblique Spot Light Specification
| Type | CTG3-A | |
| Power(W) | 1000 | |
| Voltage(V) | 220/110 | |
| Lamp Holder | E40 | GX9.5 |
| Llluminant | Incandescent Light Bulbs | Tungsten Halogen Lamp |
| Luminous Flux(Lm) | 17000 | 22000 |
| Remark | With Control Panel | |
| Protection Class | IP56 | |
| Weight( Kg) | 40.5 | |