CABLE DESIGNATION
250V MPY, MPYE, FA- MPY, FA-MPYE
250V MPYC, MPYCE, FA- MPYC, FA-MPYCE
250V MPYCY, MPYCYE, FA- MPYCY, FA-MPYCYE
APPLICATION STANDARD
- Design guide : JIS C 3410(1999)
- Flame retardant : IEC 60332-1 & IEC 60332-3 Category A (FA-Type)
- Cold bend/impact : CSA 22.2 No. 03 (-35℃ ) (Cold Type)
- Max. conductor temperature : 85℃
TECHNICAL DATA
1. CABLE TYPE: 250V (FA-)MPY, 250V (FA-)MPYC, 250V (FA-)MPYCY
No. of Cores : 2, 4, 5, 7, 9, 12, 16, 19, 23, 27, 33, 37, 44, 77 core
Nominal Area(mm2)：1.0
2. CABLE TYPE:250V (FA-)MPYE, 250V (FA-)MPYCE, 250V (FA-)MPYCYE
No. of Cores : 2 + Earth, 4 + Earth, 7 + Earth, 12 + Earth, 19 + Earth, 27 + Earth, 37 + Earth, 44 + Earth core
Nominal Area(mm2)：1.0
| Classification | Code | Construction Detail | ||
| Conductor | M | Stranded tinned annealed copper wires as per JIS C 3410. | ||
| Insulation | P | EPR as per JIS C 3410. | ||
| Cabling | Insulated conductors shall be cabled. Flame retardant & non-hygroscopic fillers may be used. Suitable tape(s) may be applied on the cabled core. | |||
| Sheath | Y | PVC as per JIS C 3410. | ||
| Armor | C | Braid of galvanized steel wires. Coverage density is minimum 90%. | ||
| Paint | The white paint shall be painted uniformly on the steel wire braid Protective covering Type, paint is dispensable. | |||
| Protective Covering | Y | PVC as per JIS C 3410. Outer sheath color : BlacK | ||
| Core identification | Without Earth core | With Earth core | ||
| Black No. on white insulation | Black No. on white insulation, G/Y | |||
| Note Fire resistant type (“FRA-”) & Cold type cable (“(C)”) can be supplied. | ||||